Profoon Telecommunicatie TAM-60X - Manual (Page 10)

REMOTE OPERATION:
Security code:
This unit can be operated from almost any touch-tone phone. The Security Code
is preset to 19. You can operate the unit remotely with this code, but we suggest
you set your own new code. To change this code, follow the instructions below.
1. Press and hold the CODE/
button for 2 seconds; a beep will sound and the
current code will blink.
2. Press the RING/ button and/or CODE/ button to change the security
code.
3. When the code setting appears, press the STOP button.
To check the current security code setting, press and release the CODE/ but-
ton; the current security code will briefly appear in the display.
Notes:
* If a power failure occurs and there is a dead or no battery, the Access Code
resets to 19.
* If you forget the Access Code, unplug the AC adapter and disconnect the
battery and it will reset to 19.
* Be sure to write down your new Access Code and store it in a safe place.
Remotely playing incoming messages (ICM's):
1. Call the answering machine from a separate line.
2. During the OGM, enter your security code.
3. Press the "5" pad and the unit will playback the messages.
- To repeat the currently playing message, press the "4" pad.
- To skip backward to previous messages, press "4" and then quickly press
"4" again.
- To skip forward to the next message, press the "6" pad.
- To erase the currently playing message, press the "0" pad.
4. Press the "9" pad to stop playback. After Playback, all messages will still be
saved for when you return home.
Turning the answering machine on (if you forget to turn on)
1. Call the answering machine from a separate line.
2. If the unit is off, it will answer after 8 rings, the unit will emit a 3 second beep.
3. Enter your security code within 10 seconds, and then the unit will switch to the
Answer/Record mode. If you do not enter your security code within 10
seconds, the unit will stop and disconnect.
Remotely playing OGM1, OGM2:
1. Call the answering machine from a separate line.
2. During the OGM, enter your security code.
3. Press the "1" pad to play OGM1 or the "2" pad to play OGM2.
10