PYLE Audio PT-688CU - Manual (Page 2)

1
Precautions
Thank you for purchasing this HI-FI product. Taking time to
read these operating instructions carefully before use will
acquaint you fully with all its features and help ensure optimum
performance.
In order to simplify the explanation illustrations may sometimes
differ from the originals.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING: To prevent fire or shock hazard, do not expose this
appliance to rain or moisture
Power plug
When disconnecting the power cord from the power outlet,
always take hold of the plug, and not the wire, and pull free.
Never connect or disconnect the power plug with wet hands
since you may receive an electric shock.
Remember to disconnect the power plug from the power outlet
when you do not intend to use the unit for a prolonged period of
time.
Do not remove the case and bottom panel
Any inspections or adjustments inside the unit may lead to
malfunctions and electric shocks. Do not touch any of the
inside parts.
Ventilation warning
The normal ventilation of the product shall not be impeded for
intended use.
Installation precautions
Do not install the unit in any of the following locations since this
may result in deterioration in performance or malfunction:
- Locations exposed to direct sunlight or near objects radiating
heat such as heating appliances.
- Locations exposed to moisture or humidity.
- Locations with poor ventilation exposed to dust and dirt.
- Locations which are unstable and not perfectly flat or which
are susceptible to vibration.
Do not wipe with thinners
Wipe the panels and case from time to time with a soft cloth.
Using any kind of thinner, alcohol or volatile liquid will mar the
surface, cause blotching on the exterior and erase the
markings and should therefore be avoided. Do not use
insecticide sprays in the vicinity.
Dripping warning
The product shall not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases, shall be placed
on the product.