PYLE Audio PT-688CU - Manual (Page 4)

3
Front Panel Information
1. Power
Press this button to power on/off this unit.
2. Phones
- This is the jack for headphones. Connect the plug on the stereo headphones for private listening.
- Adjust the volume so that it does not hurt your ears when using the headphones.
- If you do not intend to use your headphones, always ensure that you unplug them.
3. /
Press this button once to stop disc playback. Press it again to open the disc tray and third press to close it.
4.
Fast motion reverse playback.
5.
Fast motion forward playback.
6.
Press this button to skip back a track.
7.
Press this button to skip forward a track.
8.
Press this button to begin or pause playback.
9. Encoding
Under CD mode, after the disc loading, press this button once. There will be “REC” display in the VFD. After it stop flashing, it will
start to play and convert all the tracks on the disc to be MP3 and save in the USB stick when there is USB plug in.
Press / once will stop the encoding and press it twice to stop the disc playback.
If you want to choose some tracks to be converted to MP3, press “MEM.” on the remote control and then enter the track no. with the
numberic keys on the remote control. Press “MEM.” again to confirm after each track selection. Press the Encoding button as
described above to start the encoding.
10. USB port
11. Remote sensor
12. Indicator (VFD)
Indicates the current status of the unit.
13. Disc Tray