Panasonic DMR-XW350 User Manual

Page 93

Advertising
background image

93

RQT9429

Con

venient

functions

Setting the proxy server

In most cases, default settings can normally be used without

making any changes.

Please use this setting when instructed to by your Internet provider.

Set the proxy server only after the connection test is completed

properly.

1 Press [FUNCTION MENU].

2 Press [e, r] to select “Others” and press [OK].

3 Press [e, r] to select “Setup” and press [OK].

4 Press [e, r] to select “Network Settings” and

press [OK].

5 Press [e, r] to select “Proxy Server Settings”

and press [OK].

RETURN

Proxy Server Settings

Initialize

Proxy Address

Proxy Port Number

OK

Connection Test

0

----

6 Press [e, r] to select “Connection Test” and

press [OK].

RETURN

Proxy Server Settings

Initialize

Proxy Address

Proxy Port Number

OK

Connection Test

0

----

“Testing...”: The test is in progress.

“Pass”:

The connection is completed.

Press [RETURN ] to exit.

“Fail”:

Please check the connection and settings.

7 Press [e, r] to select “Proxy Address” and

press [OK].

(

➡ 80, Entering text)

After the input of “Proxy Address” is completed

8 Press [e, r] to select “Proxy Port Number” and

press [OK].

9 Enter numbers with the numbered buttons and

press [OK].

1

Proxy Port Number

Please input HTTP Proxy Server Port Number
and press “OK”. The number will be set to “0”
by pressing “OK” when there is no number
input.

0

-

Number

9

10 Press [w, q] to select “Yes” and press [OK].

To set back to default setting

After performing steps 1–5 (

➡ above)

1

Press [e, r] to select “Initialize” and press [OK].

2

Press [w, q] to select “Yes” and press [OK].

Setting the network service (VIERA CAST)

In most cases, default settings can normally be used without

making any changes.

Please use this setting when instructed to by your Internet provider.

1 Press [FUNCTION MENU].

2 Press [e, r] to select “Others” and press [OK].

3 Press [e, r] to select “Setup” and press [OK].

4 Press [e, r] to select “Network Settings” and

press [OK].

5 Press [e, r] to select “Network Service” and

press [OK].

RETURN

Network Service

Network Lock

Automatic Volume Control

Picture Zoom

OK

Off

On

In

DMR-XW450_GL_en.indb 93

DMR-XW450_GL_en.indb 93

2009/04/08 午前 10:06:50

2009/04/08 午前 10:06:50

Advertising
This manual is related to the following products: