Additional connections – Panasonic DMR-XW350 User Manual

Page 96

Advertising
background image

96

RQT9429

Additional connections

Connecting with an HDMI compatible television and receiver

When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted. You can enjoy high quality, digital

video and audio with just one cord. When connecting to an HDMI-compatible HDTV (High Defi nition Television), the output can be switched to

1080p, 1080i or 720p HD video.

This unit incorporates HDMI

TM

(V.1.3a with Deep Colour, x.v.Colour

TM

) technology (

➡ 114, 115).

Video sources converted to 1920×1080 resolution, while of high quality, will exhibit somewhat lower subjective image resolution than true,

native 1080p full-HD sources. See dealer for details.

Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover).

When outputting 1080p signal, please use HDMI Cables 5.0 meters or less.

Regarding VIERA Link “HDAVI Control

TM

” function

When connecting with a Panasonic TV (VIERA) or a receiver equipped with the “HDAVI Control” function, linked operations would be possible.

[

➡ 74, Linked operations with the TV (VIERA Link “HDAVI Control™”)]

Non-HDMI-compliant cables cannot be utilised.

It is recommended that you use Panasonic’s HDMI cable.

Recommended part number:

RP-CDHG10 (1.0 m), RP-CDHG15 (1.5 m), RP-CDHG20 (2.0 m), RP-CDHG30 (3.0 m), RP-CDHG50 (5.0 m), etc.

This unit’s rear panel

OPTICAL

COAXIAL

OUTOUT

A

V4 IN

A

V4

IN

S VIDEO

VIDEO

R-AUDIO-L

P

R

P

B

Y

10BASE-T/

100BASE-TX

COMPONENT

VIDEO OUT

DIGITAL

AUDIO OUT

(PCM/

BITSTREAM)

RF OUT

RF IN

HDMI AV OUT

HDMI IN

HDMI IN

HDMI OUT

HDMI cable

HDMI cable

Television’s rear panel

Receiver’s rear
panel

Required setting

Set “HDMI Video Mode” and “HDMI Audio

Output” to “On” (

➡ 89).

(The default setting is “On”.)

Note

If you are connecting to a TV that is only compatible with 2 channel audio output, audio with 3 channels or more will be down mixed (

➡ 114)

and output as 2 channels, even if connecting with an HDMI cable. (Some discs cannot be down mixed.)

You cannot connect this unit to DVI devices that are incompatible with HDCP.

For units compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection that are equipped with a digital DVI input

terminal (PC monitors, etc.):

Depending on the unit, images may not display properly or at all when connecting with a DVI/HDMI switching cable. (Audio cannot be output.)

DMR-XW450_GL_en.indb 96

DMR-XW450_GL_en.indb 96

2009/04/08 午前 10:06:52

2009/04/08 午前 10:06:52

Advertising
This manual is related to the following products: