Planet Technology VIP-321 - Manual (Page 11)

Rear Panel of VIP-321
Physical Interfaces Description
WAN
RJ-45 connector, to maintain the existing network structure,
connected directly to the xDSL/Cable modem through
straight CAT-5 cable.
LAN
RJ-45 connector, for Internet access, connected directly to
Switch/Hub, through straight CAT-5 cable.
RESET Reset to the factory default setting.
LINE
RJ-11 connector, connected directly to the PSTN analog line.
Press " ＊＊ " to switch to PSTN mode.
Power 7.5V DC Power input outlet.
•
Machine default IP is http://192.168.0.1 . Press RESET
button and hold over 10 seconds will reset the device to
factory default value.
•
If press RESET button 1~9 seconds only to enable the
device reset function.
Í
Note