Planet Technology VIP-321 - Manual (Page 39)

DECT Handset Page Setting
In DECT Handset Page Setting page, user can press “Submit“ to enable DECT Page.
To do Paging through the push button:
One can also push and keep the PAGE/Registration/RESET push button 1 ~9 seconds and then
release the push button to page the DECT handsets.
Start Configuration the DECT Phone
Turning Handset ON/OFF
When you place the handset on the base, it automatically turns on.
To turn the handset on (when it's off), press the button then you switch the display on.
To turn the handset off, keep the button pressed until "Goodbye!" message appears, then the
display turns off.
Registering a New Handset
You can register to your base additional handsets in order to share the same line with other people. To
do that you should assign a number to each new handset you will register. As you know, the supplied
handset is already registered with the number 1; in fact it shows HS (1). For security reasons, the
registration procedure can be done only by people who are nearby your base and know the base PIN
which acts as phone's authentication code.
Step1. Please press and hole on the DECT Base unit for about 3 second, then releases the
button.
Nothing will appear on the display when battery power is
very low. You should fully charge the handset before using
it.
Í
Note
Step2. Press MENU key to display the main menu items.
Step3. Press the navigation key repeatedly to choose, and then press the SELECT key.
Step4. Press the Up or Down key to choose Register H/Set, then press the SELECT key.