Planet Technology Media Converter Chassis MC-1000R - Manual (Page 12)

11
4. Installation
4.1 Installing Media Converter Chassis to 10/19-inch
Wiring Closet Rack
• Install four screws through mounting ears into each side
• Locate Converter Chassis at 10/19-inch mounting rails and screw up
the front brackets
• Set Main power switch at “OFF” position before connecting the power
cord
4.2 Installing Converters to the Media Converter Chassis
• Turn off the Converter Chassis power
• Verify the Media Converter is right for this Chassis and locate +5VDC
power jack on converter back, carefully slide in and plug to match
10”/19” Chassis slot +5V DC receptacle. Push up the picket fence to
lock the converters
Note
The slide-in Media Converters and Converter Chassis
should be supplied only from PLANET, both Media
Converters and Chassis are built to match each other
at dimensions, DC power jack, and DC receptacle and
power safety.
• Ensure that there is no activity in the network
• Connect the media cable for network connection
• Turn on the chassis power, the Power LED, and both FAN LED indica-
tors will light up