Planet Technology Media Converter Chassis MC-1000R - Manual (Page 13)

12
4.3 Converter Check point
Fiber
Port
Attach the fiber cable. The Tx,
Rx fiber cable must be paired at
both ends
2.5mm
DC Receptacle
2.5mm
+5V for each slot
DC receptacle is 2.5mm
wide that conforms to
and matches the Media
Converter 2.5mm DC
jack’s central post. Do
not install any improper
unit, model of the Media
Converter
TP
Port
Attach UTP Cat. 3 or 5 cable to
TP port
MPR: To a Hub or Repeater
DTE: To a workstation or NIC
Slide switch “DTE”/”MPR” is on
the side panel. Default: MPR
BNC
Port
Attach T-Connector to BNC port
and connect the RG-58 coaxial
network.
Ensure
the coaxial cable/
segment is terminated at both
ends properly.
Note
For safety reason, it is recommend storing the AC
adapter of the converter in a known secured place. For
more about converter, refer to the user guide of the
converter.