Panasonic KX-TDE100 User Manual

Page 193

Advertising
background image

4.1 Troubleshooting

Operating Manual

193

My proprietary telephone does not have
a feature button.

Some models do not have the feature button.

Change a flexible button to the desired button.

(

3.1.4 Customizing the Buttons)

Enter the specified feature number instead of the

feature button. (

1.1.1 Before Operating the

Telephones)

A reorder tone is audible or "Restricted"
is displayed.

The telephone is locked.

Unlock your telephone. (

1.3.24 Extension

Dial Lock, 2.1.5 Remote Extension Dial Lock)

Toll restriction is activated.

Consult your manager.

An account code is required. (

1.3.2 Account

Code Entry, 1.3.67 Verification Code Entry, 1.3.73
Walking COS
)

I cannot make an outside call using the
One-touch Dialing button or speed
dialing.

A line access number was not stored.

A line access number is required for outside calls.

(

1.2.1 Making Calls, 3.1.4 Customizing the

Buttons)

I cannot remember the feature numbers.

If the feature numbers have been changed from

the default values, write the new feature numbers in
the table in "4.2.1 Feature Number Table".

Ask your dealer to change the feature numbers for

easier use.

While talking to an outside party, the line
is disconnected.

The time limit has run out. (

1.3.11 Call Transfer,

1.3.16 Conference, Unattended)

Consult your dealer to extend the time limit, if

necessary.

Redialing does not function.

The stored number was more than 32 digits or an
extension number.
(

1.3.58 Redial, Last Number)

I cannot have a conversation using the
Bluetooth headset.

Make sure that the headset is properly registered

to the module.

Make sure that the headset is properly charged

according to the manual of the headset.

Remove the wired headset from the headset jack.

Priority is given to the wired headset when both are
connected.

I cannot register, de-register, or confirm
the ID of the Bluetooth headset.

Make sure that the module is properly installed in

the IP-PT.

The personal computer and fax machine
communication failed.

An indication tone may have interrupted
communication.
(

1.3.17 Data Line Security)

Problem

Remedy

Advertising