Panasonic KX-TDE100 - Manual (Page 78)

1.3 Telephone Features and Operation
78 Operating Manual
To set the timer for "No Answer" and "Busy/No Answer"
Call Forwarding (FWD) for your Incoming Call Distribution Group
• When using a proprietary telephone, you can set or cancel Call Forwarding by pressing the
FWD/DND button (fixed button) instead of " 710".
• The FWD/DND button light shows the current status as follows:
Off: Both features are not set.
Flashing red slowly: FWD mode
Red on: DND mode
• The Group FWD button light shows the current status as follows:
Off: No set
Flashing red slowly: FWD mode
Off-hook. Enter time
(seconds [2 digits]).
time
PT/SLT/PS
Enter 713. On-hook.
1 3 7
C.Tone
PT/SLT/PS
0
1 Set
Cancel
OR
Enter 1 to set
or 0 to cancel. Enter ICD Group
extension number.
ICD Group
extension no.
Off-hook.
5
6
4 Both Calls
Intercom Calls
Outside Calls
OR
OR
Enter 71.
1 7
Enter 4 to 6 as
you desire.
Enter #. On-hook. Enter destination extension number.
Or enter CO line access number
and then outside phone number.
OR
destination
extension no.
(Max. 32 digits)
outside
phone no.
CO line
access no.
C.Tone
ICD Group: Incoming Call Distribution Group
For "Cancel", go on-hook
directly after entering ICD
Group extension number.