Panasonic CQ-CB9900U - Manual (Page 10)

18
CQ-CB9900U CQ-CB9900U
19
Disc Insert
1 Press [OPEN].
2 Insert a disc.
≥ Playback will start automatically after recognizing
the data of the loading disc.
≥ It may take some time to start playing.
Note:
≥ Do not insert a disc when the disc indicator lights
because a disc is already loaded.
Before Disc Playback
Track Selection
[ 9]: Next track
[ :]: Beginning of the current track
For the previous track, press twice.
Fast Forward/Fast Reverse
Press and hold
[
9] (5): Fast forward
[ :] (6): Fast reverse
Release to resume the playback.
Pause
Press [ ;/1].
Press [ ;/1] again to cancel.
Scan Play
The fi rst 10 seconds of each track is played in
sequence.
Press [5] (SCAN).
lights.
Press [5] (SCAN) again to cancel.
Direct Track Selection
Example: track number 10
1 Press [ fl].
2 Press [1] [0].
3 Press [BAND] (SET).
Note:
≥ To suspend direct selection, press [DISP]
(display) or [ fl].
≥ Random, scan and repeat play are canceled once
[ fl] is pressed.
Text Display
Press and hold [DISP] (display) for more than
2 seconds in the mode display.
Note:
≥ The power will be turned on automatically when
a disc is loaded.
A disc which has both CD-DA data and
MP3/WMA data on it may not be reproduced
normally. (For example, it may be reproduced
without sound.)
≥ Refer to the section on “Notes on MP3/WMA”
(page 26) and “Notes on Discs” (page 48).
CD Player
Do not watch the scroll display while driving.
[OPEN]
[ :]/[9] (6/5)
(Track selection/fast forward/fast reverse)
[SOURCE]
[BAND]
(
;/1:
Pause)
(SET)
[0] to [9]
(Track number)
[5] (Scan play)
[
6] [5]
(Track selection/fast
forward/fast reverse) 6 4
9 7
5
Car Audio
SOURCE
MUTE
POWER
RAND
VOL
3 1 2
DISP BAND
REP
6 5
SET
SEL
#
SCAN
MENU
NUMBER
8
0 [DISP]
(Display)
[SOURCE]
[BAND]
(Pause) (SET)
[ fl]
(Number)
Available Discs
∫ CD-DA
∫ MP3/WMA
(Example: CD-DA)
* Press and hold [SQ] (SCROLL) for more than
2 seconds to have an another circle scroll when a
title is displayed.
Note:
≥ “NO TEXT”: Displays when there is no text.
*Disc/track title (default)
Mode display
[DISP] (Display)
When CD is in the Player
Press [SOURCE] to select the CD (MP3/WMA)
player mode and playback starts.
Disc Eject
1 Press [OPEN].
2 Press [ <] (eject) and take the disc.
3 Close the front panel manually.
This instructions on this page are followed for both CD-DA playback and MP3/WMA playback.
Disc indicator
Label side
Close.
[ <] (Eject)
Caution:
≥ 3q (8 cm) CD is not available for this unit, so
do not insert it.
≥ Do not use irregularly shaped discs.
≥ Do not use discs that have a seal or label
attached.
≥ Be sure to close the front panel while CD
playback.
≥ To avoid damaging the front panel, do not push
it down or place objects on it while it is open.
≥ Do not pinch your fi nger or hand in the front
panel.
≥ Do not insert foreign objects into the disc slot.
[SQ]
(SCROLL)
Disc indicator
lights when the disc is loaded.