Panasonic SC-BT330 - Manual (Page 18)

18
VQT2M13
STEP 4: AC power supply cord connection
Connect only after all other connections are complete.
A AC power supply cord (included)
(For units with PX printed on the packaging)
≥If the power plug does not fit your AC outlet,
use the AC plug adaptor (included). If it still doesn't fit,
contact an electrical parts distributor for assistance.
[BT730]
≥AC power supply cord with a label is for the wireless
system. Do not use any other AC power supply cords
except the supplied one.
B To a household AC outlet
Main unit
≥This unit consumes a small amount of AC power, even when it is turned off.
For the U.S.A. and Canada [BT730] [BT330]: approx. 0.05 W* [BT230] [BT235]: approx. 0.1 W*
For units with PX printed on the packaging [BT730] : approx. 0.1 W* [BT230]: approx. 0.2 W*
*When the “Quick Start” setting is “Off”
In the interest of power conservation, if you will not be using this unit for a long time, unplug it from the household AC outlet.
Wireless system [BT730]
For the U.S.A. and Canada: approx. 0.2 W
For units with PX printed on the packaging: approx. 0.3 W
STEP 5:
[BT730]
Preparing the wireless system
Turn on the wireless system after all connections are complete.
AC IN
220 240V 110 127V
VOLT ADJ


Main unit
The main unit shows SC-BT730 for the U.S.A.
and Canada.
AC IN


[BT730]
Wireless system
(For units with PX printed on the packaging)
Before connecting the AC power supply cord;
Set the voltage .
≥Use a flat-head screwdriver to move the voltage
selector to the appropriate position for the area
in which this system is used.
The socket outlet shall be installed near the equipment and easily accessible. The mains plug of the power supply cord shall
remain readily operable. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug
from AC receptacle.
WIRELESS LINK POWER
WIRELESS LINK indicator
Red:
The wireless system is on and the wireless link is deactivated.
Green : The wireless system is on and the wireless link is activated.
(“ [W] ” is also displayed on the main unit’s display.)
Press [ POWER C I, B Í] on the wireless system.
Unit on/off button [POWER C I, B Í]
C I: The wireless system is on.
B Í: The wireless system is off.
Wireless system
SC-BT230_330_730P_PC_VQT2M13_eng.book 18 ページ ２０１０年３月１６日 火曜日 午後５時５７分