Palsonic DVD/CD/MP3 Player DVD2030 - Manual (Page 17)

Select [Video Output], and press ENTER or to display
the [Video Out] submenu:
A. Press ENTER to confirm.
B. Press SETUP to exit the Setup Menu.
Note: The Composite video and
S-video output is always available.
[S-Video] - Select if you connected the DVD player
to your TV using the composite Video output.
[YUV] -Select if you connected the DVD player to your TV using the YUV output.
[Y Pb Pr] - Select if you connected the DVD player to your TV using progressive scan.
16
Advanced Features
Modes and Features Setup
Audio Setup
Language Video Audio Rating
Digital Out
Down sampling
DRC
Raw
Off
Off
Language Video Audio Rating
TV signal
TV system
Video Output
4:3 PS
NTSC
S-Video S-Video
YUV
YPbPr
The Audio menu allows you to set the analog and digital audio outputs to correspond with the external components
you have connected to the player. For example, if you connected the player to a TV using the Stereo Audio jacks,
you should set 2 channel to enjoy downmixed stereo audio.
You can set the audio format for each of the following sources: MP3, CD and Others.
DVD playback must be stopped in order to adjust the Audio setup.
AC-3 Setting
Follow these steps to set the analog and digital audio formats of
outgoing Dolby Digital 2.1 sound tracks:
A.
B.
C.
D.
E.
From Stop mode, press SETUP.
Select Audio and press ENTER.
Set Bitstream to:
2 Channel To output downmixed 2 channel stereo from the
stereo audio outputs; e.g., to a VCR or TV.
Set Digital Out to:
LPCM (default) To output 2 channel digital from the optical/coaxial digital audio outputs; e.g., to a Mini Disc recorder.
Press SETUP to save and exit.
PCM stands for Pulse Code Modulation, and is the standard 2-channel stereo format used for audio Cds.
Press to change your selection.
Down sampling
Down the 96KHz sampling frequency to 48KHz (some equipment that does not support 96Khz).
DRC
You can turn on DRC to make the voice soft.
Note: When the digital output is set to PCM, the DRC is available.