Installing your dvd recorder, Problem – Philips DVDR75/021 User Manual
Page 28
22
Virgin mode
TV Shape
4:3 letterbox
4:3 panscan
16:9
Press OK to continue
7
Select the desired screen format position using CH-
B or CH+ A .
These settings will only be used if you insert a DVD that contains this
information.
Which screen formats can I select?
'4:3 letterbox'
for a 'wide-screen' (cinema format) picture with black bars at
the top and bottom.
'4:3 panscan'
for a full-height picture with the sides trimmed.
'16:9'
for a wide-screen TV set (screen edge ratio 16:9)
?
8
Confirm with OK .
Virgin mode
Country
Austria
Belgium
Denmark
Finland
France
Press OK to continue
9
Select the country of your residence with CH-
B or CH+ A .
If your country does not appear, select 'Other'.
Why do I have to select a country?
To call up the specific settings for the respective country, you must first install
the country.
?
0
Confirm with OK .
A
After you connect the aerial (or cable TV, satellite receiver, etc.) to
the DVD recorder, press OK .
The automatic TV channel search starts. '
WAIT' will appear on the
display.
Installation
Autom. search
Searching for TV channels
00 Channels found
Please wait
aThe DVD recorder cannot find any TV stations
b Select channel 1 on the TV set. Can you see the stored TV channel on the
TV set?
If not, check the cable connection from the aerial (aerial socket) to the
DVD recorder and to the TV set.
b Please have patience.
The DVD recorder searches the entire frequency range in order to find
and save the largest possible number of TV channels.
b If you have not connected an aerial, go through all the basic settings right
to the end and then, if you wish, start the automatic search (see 'Automatic
TV station search').
Problem
B
When the automatic TV channel search is complete, 'Autom.search
complete' will appear on the TV screen.
'Time', 'Year', 'Month', 'Date' will then appear on the TV screen.
Autom. search
Autom. search complete
00 Channels found
Time
20:01
Year
2003
Month
01
Date
01
To continue
Press OK
C
Check if the time in 'Time' is correct.
À
If required, change the time with the number buttons 0..9 on your
remote control.
Á
Select the next line with CH+
A or CH- B .
Installing your DVD recorder