Philips DVDR75/021 - Manual (Page 34)

28
Automatic TV channelsearch
During installation, all available TV channels are searched for and stored. If the channel
assignments of your cable or satellite TV provider change or if you are reinstalling the DVD
recorder, e.g. after moving house, you can start this procedure again. This will replace the stored
TV channels with the new ones.
What does Easy Link do?
With Easylink, you can search for and store TV channels only on the TV set.
These settings are accepted by the DVD recorder. Use this function to start
the transfer of TV channels from the TV set.
?
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Switch on the DVD recorder using STANDBY/ON m .
3
Press SYSTEM-MENU on the remote control. The menu bar
appears.
4
Select ' A ' symbol with D or C .
5
Select 'Installation' using CH- B or CH+ A and confirm with C .
6
Select 'Autom.search' using CH- B or CH+ A .
7
Press C .
Installation
Autom. search
Searching for TV channels
00 Channels found
Please wait
8
The automatic TV channel search starts. This allows the DVD
recorder to save all available TV channels. This procedure may take
several minutes.
9
When all the TV channels have been found, 'Autom.search
complete' will appear on the TV screen.
0
To end, press SYSTEM-MENU .
You can read about how to search for a TV channel manually in 'Manual TV channel search'.
Installing your DVD recorder