Planar PR Line PR6022 - Manual (Page 19)

DLP
®
Projector – User’s Manual
Starting and Shutting down the Projector
1.
Connect the power cord to the
projector. Connect the other end to
a wall outlet.
The Power and Ready LEDs on
the projector light.
2.
Turn on the connected devices.
3.
Ensure the Ready LED displays a
solid orange and not a flashing or-
ange. Then press the Power
button to turn on the projector.
The projector splash screen displays
and connected devices are de-
tected.
See Setting an Access Password
(Security Lock) on page 13 if security
lock is enabled.
4.
If more than one input device is con-
nected, press the Source button
and use
▲▼ to scroll among de-
vices.
(Component is supported through
the RGB to Component adapter.)
• RGB: Analog RGB
Component: DVD input YCbCr / YPbPr, or HDTV
input YPbPr via HD15 connector
•
Composite Video: Traditional composite video
• S-Video: Super video (Y/C separated)
– 11 –