Planar PR Line PR6022 - Manual (Page 46)

DLP
®
Projector – User’s Manual
Resetting the Lamp
After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following:
1.
Press the Menu button to open
the OSD menu.
2.
Press the cursor
◄► button to
move to the Installation II menu.
Press the cursor button to move
down to Advanced.
3.
Press the cursor ▼▲ button to
move down to Lamp Hour Reset.
4.
Press the cursor
► or Enter
button.
A message screen appears.
5.
Press ▼▲◄► buttons to reset
the lamp hour.
6.
Press the Menu button to get
back to Installation II.
– 38 –