Specifications, Maintenance, When moving the unit – Panasonic SC-PM313 User Manual

Page 16: Specifi cations, If the surfaces are dirty, For a cleaner crisper sound

Advertising
background image

Panasonic Consumer Electronics
Company, Division of Panasonic
Corporation of North America
One Panasonic Way Secaucus,
New Jersey 07094
http://www.panasonic.com

Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985

© 2004 Matsushita Electric Industrial Co., Ltd.
Printed in Malaysia

Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario,
L4W 2T3
www.panasonic.ca

RQT7923-3P

L1204CP3025

En

Specifi cations

AMPLIFIER SECTION
FTC Output Power both channel driven
10% total harmonic distortion
60 Hz–3 kHz
(Low channel)

SC-PM31

35 W per channel (6 Ω)

SC-PM313 30 W per channel (6

Ω)

3 kHz–16 kHz
(High channel)

SC-PM31

35 W per channel (6 Ω)

SC-PM313 30 W per channel (6

Ω)

Total Bi-Amp power

SC-PM31

70 W per channel

SC-PM313 60 W per channel

RMS Output Power both channel driven
10% total harmonic distortion
1 kHz
(Low channel)

SC-PM31

40 W per channel (6 Ω)

SC-PM313 35 W per channel (6

Ω)

8 kHz
(High channel)

SC-PM31

40 W per channel (6 Ω)

SC-PM313 35 W per channel (6

Ω)

Total Bi-Amp power

SC-PM31

80 W per channel

SC-P

SC-PM313 70 W per channel

Output Impedance
Headphone 16

Ω – 32 Ω

FM TUNER SECTION
Frequency range

87.5 MHz – 108.0 MHz (100 kHz steps)

87.9 MHz – 107.9 MHz (200 kHz steps)

Sensitivity 1.02 µV (IHF)
S/N

26 dB 1.00 µV

Antenna terminal(s) 75

Ω (unbalanced)

AM TUNER SECTION
Frequency range

520 kHz – 1710 kHz (10 kHz steps)

Sensitivity
S/N

20 dB (at 1000 kHz) 900 µV/m

CASSETTE DECK SECTION
Track system

4 track, 2 channel

Heads
Record/playback

Solid permalloy head

Erasure

Double gap ferrite head

Motor

DC servo motor

Recording system

AC bias 100 kHz

Erasing system

AC erase 100 kHz

Tape speed 4.8 cm/s
Overall frequency response (+3 dB, –6 dB) at DECK OUT
NORMAL
35 Hz – 14 kHz
S/N RATIO

42.64 dB (A weighted)

Wow and fl utter 0.08%

(WRMS)

Fast forward and rewind time

Approx. 120 seconds with C-60 cassette tape

CD SECTION
Disc
CD, CD-R, CD-RW, MP3

8 cm/12 cm (3

3

/

20

˝/4

73

/

100

˝)

Sampling frequency 44.1 kHz
Decoding

16/20/24 bit linear

Beam source/wavelength Semiconductor

laser/780 nm

Number of channels Stereo
Frequency response 20 Hz – 20 kHz (+1dB, –2 dB)
Wow and fl utter

Below measurable limit

Digital fi lter

8 fs

D/A converter

MASH (1 bit DAC)

MP3
Bit

rate

32 kbps – 320 kbps

Sampling frequency

32 kHz, 44.1 kHz, 48 kHz

SPEAKER SECTION
Type

2 way, 2 speaker system

Speaker(s)
Woofer

10 cm (4˝) cone type

Tweeter

6 cm (2

3

/

8

˝) cone type

Impedance

6 Ω

Input power (IEC)
HIGH 80 W (Max)
LOW 80 W (Max)
Output sound pressure level

SC-PM31

79 dB/W (1.0 m)

SC-PM313 81 dB/W (1.0 m)

Frequency range

SC-PM31

45 Hz – 26 kHz (–16 dB)

50 Hz – 25 kHz (–10 dB)

SC-PM313 55 Hz – 22 kHz (–16 dB)

75 Hz – 20 kHz (–10 dB)

Dimensions (WxHxD)

SC-PM31

153 mm x 254 mm x 239 mm

(6

1

/

32

˝ x 10˝ x 9

13

/

32

˝)

SC-PM313 145 mm x 254 mm x 217 mm

(5

23

/

32

˝ x 10˝ x 8

18

/

32

˝)

Mass

SC-PM31

1.83 k

g (4.03 lbs.)

SC-PM313 2.00 k

g (4.41 lbs.)

GENERAL
Power supply

AC 120 V, 60 Hz

Power consumption

135 W

Dimensions (WxHxD)

175 mm x 254 mm x 391 mm

(6

7

/

8

˝ x 10˝ x 15

3

/

8

˝)

Mass

5.44 k

g (11.99 lbs.)

Power consumption in standby mode: 0.4 W

Notes:

1. Specifi cations are subject to change without notice.

Mass and dimensions are approximate.

2. Total harmonic distortion is measured by the digital spectrum

analyzer.

3. The labels “HIGH” and “LOW” on the rear of the speakers refer to

High frequency and Low frequency.

Maintenance

Maintenance

If the surfaces are dirty

If the surfaces are dirty

To clean this unit, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this

unit.

• Before using chemically treated cloth, read the instructions

that came with the cloth carefully.

For a cleaner crisper sound

For a cleaner crisper sound

Clean the heads regularly to assure good quality playback
and recording.
Use a cleaning tape (not included).

When moving the unit

When moving the unit

1

Remove all discs.

2

Press [y/ I POWER] to turn the unit off.

3

Disconnect the AC power supply cord.

PM31_7923-3P.indd 16

PM31_7923-3P.indd 16

2/18/05 3:25:30 PM

2/18/05 3:25:30 PM

Advertising