Panasonic PV-D4743 - Manual (Page 28)

28 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Multi-Brand Control Feature
Mode
Unit
DVD/VCR TV
DVD/VCR
TV
All
POWER, INPUT,
NUMBER keys, ENTER,
CH / , VOL
+ / -
EJECT/ OPEN/CLOSE * ,
DISPLAY , PLAY , STOP ,
FF/SLOW+ , REW/SLOW- ,
VCR/TV, PAUSE /STILL , SKIP ,
AUDIO , CM/ZERO,
TAPE POSITION,
COUNTER RESET, SPEED,
REC
After remote is set up, you can select VCR, DVD, or TV for the
desired function.
Press VCR, DVD, or TV on the remote.
(Table below shows available remote buttons for each mode.)
Using Multi-Brand Control
• Not all functions listed may be controllable.
• In TV mode, it may be necessary to press ENTER after pressing NUMBER keys
for channel selection.
Notes
VOL + / -
* Bold: VCR Function Bold Italic: VCR and DVD Functions
Italic: DVD Function Normal: TV
DVD
POWER
NUMBER
keys
ENTER
TV
VCR
The Remote Control can be set to control some TV functions.
Find your TV Brand Code Number on the
following page.
Set up for TV control,
➛ ➛ ➛ ➛ ➛ hold down TV button,
➛ ➛ ➛ ➛ ➛ enter code with NUMBER keys.
Multi-Brand Control Setup
Confirm code entry,
➛ press POWER to turn selected unit on or off.
• See table below for controllable functions in each mode.
3
1
• Repeat setup after remote battery replacement.
• Remote will not control every TV made by the
manufacturer listed. If you get no response, your particular
unit cannot be controlled. There are NO additional codes
for the products listed. If your product is not listed, then the
remote is not compatible with that product.
Notes
2
• If code number is 100 or greater,
➛ e.g., press 1 - 0 - 2 for 102.
D4743-4743S P26-35 (030226 B-lot).p65 2003/02/26, 19:53 28