Pioneer S-DV8 - Manual (Page 13)

Connecting up 02
13
En
• The front, center and surround speakers
supplied with this system are magnetically
shielded. However, placing them extremely
close to a television may result in color
distortion on the screen. If this happens,
move the speakers a little further away and
switch off the television for 15–30 minutes.
• The subwoofer is not magnetically shielded
and so should not be placed near a TV or
monitor.
Wall-mounting the center and
surround speaker system
Before mounting
• Remember that the speaker system is
heavy and that its weight could cause the
wood screws to work loose, or the wall
material to fail to support it, resulting in the
speaker falling. Make sure that the wall you
intend to mount the speakers on is strong
enough to support them. Do not mount on
plywood or soft surface walls.
• Mounting screws are not supplied. Use
screws that are suitable for the wall
material and that will support the weight of
the speaker.
• If you are unsure of the qualities and
strength of the walls, consult a
professional for advice.
• Pioneer is not responsible for any
accidents or damage that result from
improper installation.
Connecting to your TV
This system has three different kinds of video
output that you can use to connect up your TV.
Check the available inputs on your TV to see
which you can use.
• Do not connect a VCR between this system
and your TV as DVD playback will be
affected.
• Use the supplied video cable to connect
the VIDEO OUT jack to a video input on
your TV.
Wood screw
Protrusion: 5-7mm
5 mm
5 mm
10 mm
VIDEO
CONTROL
P R
P B Y
COMPONENT
VIDEO OUT
CENTER SUB
WOOFER L R
FRONT
S-VIDEO
OUT
IN VIDEO
OUT
SPEAKERS
TV
VIDEO
INPUT
XV-DV8.book 13 ページ ２００３年１２月２７日 土曜日 午後１２時３分