Error messages, Additional information 12 – Pioneer S-DV8 User Manual

Page 77

Advertising
background image

Additional information

12

77

En

Error Messages

Sound is mono only.

• Check that the tuner is not set to FM mono (see

Improving poor FM

reception

on page 35).

Considerable noise in
radio broadcasts.

• Tune into the correct frequency.
• Connect the antenna (see

Connecting the supplied antennas

on page 18

and

Connecting external antennas

on page 71).

• Fully extend the FM wire antenna, position for best reception, and
secure to a wall.
• Connect an outdoor FM antenna (see

Connecting external antennas

on

page 71).
• Adjust the direction and position for best reception.
• Connect an additional internal or external AM antenna (see

AM loop

antenna

on page 18 and

Connecting external antennas

on page 71).

• Turn off any other equipment that may be causing the noise or move it
away from the system unit.
• The tuning interval is incorrect for your country or region. Try switching
the tuning interval (frequency step) (see

TV attenuator setting

on page 67).

Problem

Remedy

Message

Description

Child Lock

• This message appears when the front panel buttons are pressed when
the child lock feature is active. See

Child lock setting

on page 67 for more

on switching on/off the child lock.

Rec Mode On

• Blinks rapidly for 2 seconds when an operation is prohibited because
the Recording Mode is on (see

Recording mode

on page 72).

Phones In

• Blinks rapidly for 2 seconds when an operation is prohibited because
headphones are connected.

96k Stereo

• Blinks rapidly for 2 seconds when an operation is prohibited because
the source is digital 88.2 or 96kHz PCM.

No Surr. SP

• Blinks rapidly for 2 seconds when an operation is prohibited because
there is no surround speaker output.

Muting

• Blinks rapidly for 2 seconds when an operation is prohibited because
the sound is muted (press the

MUTE

button to turn the sound on).

Exit

• Appears briefly when a menu is automatically exited after a set period of
inactivity.

SR+ Error

• Appears when there is a communication problem between the unit and
the plasma display. Check all connections and retry.

XV-DV8.book 77 ページ 2003年12月27日 土曜日 午後12時3分

Advertising
This manual is related to the following products: