Pioneer VSX-D908TX - Manual (Page 24)

24
Displays and Controls
Remote Control
1 SOURCE button (See p.58-65)
Use to turn on the power of your other
components after you have recalled or taught the
signals to this remote control.
2 MULTI CONTROL buttons
Use these to select a source and the
corresponding remote operation mode.
For example, pressing TUNER selects the built in
tuner and sets the remote operation to the tuner
functions.
3 Component Control buttons
Use to control specific components, like a CD
player or DVD player, after you have programmed
the remote control to do these operations (see
p.58-65) and the remote is put in that operation
mode.
4 TV CONTROL buttons
The following buttons are used to control the TV
only and can be used no matter what function the
remote control is set to.
TV : Press to turn the power of the TV on/off.
TV FUNC : Press TV FUNC to select the TV for
remote control operation.
TV VOL +/– : Press to control the volume of the
TV.
5 MENU button
Use to get the various menus for this unit onto
your TV or DTV screen.
6 EFFECT/CH SEL +/– buttons (See p.41)
EFFECT : Use these buttons to increase or
decrease the amount of effect applied in a DSP or
Advanced Theater mode. When the amount of
effect is increased in a DSP/Advanced Theater
mode the characteristics of that mode become
stronger and more noticeable. The scale ranges
from 10-90 with 70 as the default setting. First
turn on the DSP/Advanced Theater you want (by
pressing the DSP/Advanced Theater button until
you get the mode) and then increase or decrease
the amount of effect.
CH SEL : You may want to adjust the channels
when listening to some sound sources. Use this
button to select the channel you want to adjust.
+/– : Use these buttons to select the amount of
effect in a sound mode and to adjust the channel
level when making surround sound settings.
7 5/∞/2/3/ENTER buttons
Use to operate the on-screen menu on your TV
screen and enter commands when setting up
surround sound, speakers levels & settings, and
other set up features see p.27-37). Specific use
of these buttons is described in conjunction with
the operations they perform. For more
information, see each individual section.
These pages describe the buttons on the remote
control used to operate the receiver.
S0URCE
DVD/LD TV/SAT VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO
DIGITAL NR
MIDNIGHT
ADVANCED STANDARD
DSP
THX
MUTE
TV
VOLUME
MD/
TAPE1 TUNER TV CONT
RECEIVER
MULTI
OPERATION
CLASS MPX
MULTI CONTROL
DIRECT ACCESS
STATION
CHANNEL
TUNING
DISPLAY RF ATT
TV CONTROL
FUNCTION
SIGNAL
SELECT
EFFECT
/CH SEL
2 /dts
AV PREPROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
REMOTE
SETUP
SYSTEM
SETUP
BAND
SYSTEM
OFF
1 2 3
4 5 6
7
+10
8 9
0 DISC
Î
¶ 7 3 8
1 ¡ 4 ¢
+ - + -
+ -
MPEG
1
2
3
4
5
6
7
8
9
0
~
- =
!
@
#
$
%
^
&
*
(
VSX-D938TX