Surround sound set up, Vsx-d938tx – Pioneer VSX-D908TX User Manual

Page 30

Advertising
background image

30

Surround Sound Set Up

3

Specify the type of speakers you connected. See the
explanations below for the meaning of each size.

1 Press

2 or 3 to move the cursor to LARGE, SMALL, or NO

(you cannot select NO for the FRONT speakers).

2 Press

∞.

3 Repeat 1 and 2 for each speaker.

Depending on your choices the sound will be routed
differently, as explained here.

FRONT (default setting is LARGE)
• Select small to send bass frequencies to the sub woofer.
• Select large if your speakers will reproduce bass frequencies

effectively or if you did not connect a sub woofer.
(If you select small for the front speakers the sub woofer will
automatically be switched YES. Also,the center and surround
speakers cannot be set to large if the front speakers are set to
small. In this case, all bass frequencies are sent to the sub
woofer.)

CENTER (default setting is LARGE)
• Select large if your speaker will reproduce bass frequencies

effectively.

• Select small to send bass frequencies to the other speakers or

sub woofer.

• If you did not connect a center speaker, deselect it. In this case,

the center channel is output from the front speakers.

SURROUND (default setting is LARGE)
• Select large if your speakers will reproduce bass frequencies

effectively.

• Select small to send bass frequencies to the other speakers or

sub woofer.

• If you did not connect surround speakers, deselect them. In this

case, the sound of the surround channels is output from the front
and center speakers.

SUB WOOFER (default setting is YES)
• Leave it selected if you connected a sub woofer.
• If you did not connect a sub woofer, deselect it. In this case, the

bass frequencies are output from the front or surround speakers.

• Choose the PLUS setting if you want stronger reproduction of

deep bass sounds.

• If you select PLUS the bass frequencies that would normally

come out the front and center speakers are all routed to the sub
woofer.

4

Select EXIT with the

5¥∞ buttons and press ENTER to

return to the SYSTEM SETUP MENU.

Next, proceed to CHANNEL DELAY below.

If you want to change a setting before proceeding
Simply use the arrow buttons to go back.

If you have a sub woofer and like lots of bass, it may seem logical to select LARGE for your FRONT
speakers and leave the sub woofer selected. This may not, however, yield the best bass results.
Depending on the size and shape of your room, you may actually experience a decrease in the amount
of bass due to what is called “low frequency cancellations.” If you have a sub woofer, listen to the bass
response with the FRONT speakers set to LARGE and SMALL alternatively and let your ears judge
which sounds best.
The safest option in this case is to route all the bass sounds to the sub woofer by selecting SMALL for
the FRONT speakers.

S0URCE

DVD/LD

TV/SAT

VCR1

VCR2

CD

TV VOL

TV FUNC

MENU

ENTER

STEREO

DIGITAL NR

MIDNIGHT

ADVANCED

STANDARD

DSP

THX

MUTE

TV

VOLUME

MD/

TAPE1

TUNER

TV CONT

RECEIVER

MULTI

OPERATION

CLASS

MPX

MULTI CONTROL

DIRECT ACCESS

STATION

CHANNEL

TUNING

DISPLAY

RF ATT

TV CONTROL

FUNCTION

SIGNAL
SELECT

EFFECT

/CH SEL

2

/dts

AV PREPROGRAMMED AND LEARNING

REMOTE CONTROL UNIT

REMOTE

SETUP

SYSTEM

SETUP

BAND

SYSTEM

OFF

1

2

3

4

5

6

7

+10

8

9

0

DISC

Î

7

3

8

1

¡

4

¢

+

-

+

-

+

-

MPEG

3,4

VSX-D938TX

Advertising
This manual is related to the following products: