Panasonic SC-HT820V - Manual (Page 47)

47
RQT7388
Other speaker setup options
[Note]
≥The wall or pillar on which the speakers are to be attached should
be capable of supporting 10 kg (22 Ib.) per screw.
Consult a qualified building contractor when attaching the speakers
to wall. Improper attachment may result in damage to the wall and
speakers.
≥Do not attempt to attach these speakers to walls using methods
other than those described in this manual.
1
Drive a screw (not included) into a
wall.
2
Fit the speaker securely onto the
screw(s) with the hole(s).
Ensure the stands meet these conditions before purchasing them.
Observe the diameter and length of the screws and the distance
between screws as shown in the diagram.
≥The stands must be able to support over 10 kg (22 lb.).
≥The stands must be stable even if the speakers are in a high
position.
Attaching to a wall
Fitting speaker stands (not included)
30–35 mm (1 3 / 16
q–1 3 / 8
q)
Wall or
pillar
‰7.5–9.4 mm ( 19 / 64
q– 3 / 8
q)
8–11 mm ( 3 / 8
q– 7 / 16
q)
Front and surround speakers Center speaker
150 mm
(5 29 / 32
q)
So that the speaker fits up against the
wall squarely, be sure to press the
speaker cable down into the groove.
In this position, the speaker will likely fall if
moved to the left or right.
Move the speaker so the screw is in this
position.
5 mm ( 13 / 64
q),
pitch 0.8 mm ( 1 / 32
q)
60 mm (2 23 / 64
q)
Plate thickness
plus 7 to 10 mm
(plus
9 / 32
q to 25 / 64
q)
Speaker stand
(not included)
Attach the stands
with these holes.
e.g. Front and surround speaker
Optional connections
[A] You can record sound from discs, video cassette
tapes, or radio, etc., to a tape deck.
1 Discs
Press [DVD/VHS] to select “DVD/CD” as the source.
Video cassette tapes
Press [DVD/VHS] to select “VHS” as the source.
Radio
Press [FM/AM] to select “FM” or “AM”.
2 Start recording and play.
Refer to the manual of the other unit for details.
[B] You can playback the sound from a tape deck/laser
disc player, etc., through this unit’s speakers.
1 Press [VHS] to put the remote control in VHS mode.
2 Press [DVD/VHS] to select “VHS” as the source.
3 Press [
W CH] or [X CH] to select “AU” channel.
4 Start play.
When connecting a record player
We recommend using a record player with a built-in phono equalizer.
If your player doesn’t have a built-in equalizer, connect it first to a
separate equalizer and then to the unit.
Listening to an external source/
Recording to other equipment
Audio cable (not included)
White (L)
Red (R)
A
Y
P B /C B
P R /C R
COMPONENT VIDEO OUT S-VIDEO OUT LINE
OUT LINE IN
VIDEO OUT
DVD/
VCR
VIDEO IN
EXT DVD
L
R
RF IN
RF OUT LOOP
EXT
75
AM
ANT
FM
ANT
LOOP
ANT
GND
PLAY
OUT
REC
IN
A B
L
R
7388en.book 47 ページ ２００３年１２月２２日 月曜日 午後９時３９分