PLUS Vision V3-131 - Manual (Page 26)

E-26
Adjustment of the Projection Screen
(1)
STANDBY
AUTO
SOURCE
STANDBY
STATUS
PUSH
(1)
(2)
Note:
When the projector has a rear installation is used, the orientation of the projection will need to be changed.
Please see “Vertical Flip” on Page E-49.
Adjuster button
Making Adjustments with the Adjusters
Raising the projection image
While viewing the projection image, (1) press and hold
the front adjuster buttons located at the left and right and,
(2) raise the projector to align the image with the screen,
then release your fingers.
Turn the left and right front adjusters for fine adjustment.
Adjust so that there is no shaking of the projector.
Lowering the projection image
Use the procedure described above to lower the front
adjusters.
If the rear adjusters are turned to lift the rear, the pro-
jected image lowers.
Adjust so that there is no shaking of the projector.
STA
ND BY
AU TO SO UR CE
STA
ND BY
PU SH
STA
TUS
AUDIO
S-VIDEO
VIDEO
RGB