Planar WS231 - Manual (Page 18)

User’s Manual
13
(Analog mode) (Digital mode)
Figure 2-9: When there is no input signal
The hotkey descriptions
Figure 2-10: The Hotkeys
1. Main Menu pop up /Auto-Adjust Hotkey
Press this button to activate the OSD Main
Menu. Press and hold this button for 2
seconds to activate the Auto Adjust
feature.
Figure 2-11
2. Contrast Adjust Hotkey
Press this button to activate the Contrast
Adjust function, use -/+ adjustment
control buttons to increase or decrease the
display’s contrast.
Figure 2-12
3. Brightness Adjust Hotkey
Press this button to activate the Brightness
Adjust function, use -/+ adjustment
control buttons to increase or decrease
display brightness.
4. Port Select/Power switch Hotkey
Figure 2-13
Press and release this button immediately to select either Digital or Analog input mode.
Press and hold this button for 2 seconds to power on or power off the monitor.