Connections (continued), Audio connections, Unit ➔ amplifier ➔ speaker – Panasonic PV-DF2002 User Manual

Page 12

Advertising
background image

12

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

Connections (continued)

Amplifier

Unit

Speaker

Speaker

AUDIO OUT
R L

R L

AUDIO IN

Notes on audio output from the optical digital
audio output connector

Enjoying digital audio output from the
digital audio output connector

*1 The type of audio output from the connector can be

selected by the Settings for DVD Operation. (See
page 60.)

*2 Sound having 96 kHz sampling is converted into 48

kHz sampling when it is output from the unit’s optical
digital audio output connector.

For your reference:

• Dolby Digital is a digital sound compression technique

developed by the Dolby Laboratories Licensing
Corporation. Supporting 5.1-channel surround sound,
as well as stereo (2-channel) sound, this technique
enables a large quantity of sound data to be efficiently
recorded on a disc.

• Linear PCM is a signal recording format used in CDs.

While CDs are recorded in 44.1 kHz/16 bit, DVDs are
recorded in 48 kHz/16 bit up to 96 kHz/24 bit.

• If you have a Dolby Pro Logic Surround decoder, you

will obtain the full benefit of Pro Logic from the same
DVD movies that provide full 5.1 channel Dolby Digital
soundtracks, as well as from titles with the Dolby
Surround mark. For information on Panasonic or
Technics Dolby Pro Logic Surround Sound Decoders
please contact your local dealer.

Ready Checklist

Turn down the volume, then turn this unit, as well as
other equipment to be connected, off before
proceeding with connection.
Do not block ventilation holes of any of the
equipment and arrange them so that air can
circulate freely.
Read through the instructions before connecting
other equipment.
Ensure that you observe the color coding when
connecting audio and video cables.

Disc

DVD

Video
CD

CD

Sound
recording
format

Dolby Digital

Linear PCM
(48/96 kHz
16/20/24 bit)
dts

MPEG 1

Linear PCM

Optical digital audio
output from connector

Dolby Digital bitstream
(1-5.1 ch) or OFF (no
output)*

1

Linear PCM (2ch)
(48 kHz sampling/16 bit
only)*

2

or no output*

1

Bitstream or no output*

1

PCM
(44.1 kHz sampling)
Linear PCM
(44.1 kHz sampling)

Audio connections

Manufactured under license from Dolby
Laboratories. “Dolby”, and the double-D
symbol are trademarks of Dolby Laboratories.
Confidential Unpublished Works. © 1992-1997
Dolby Laboratories, Inc. All rights reserved.

Unit

AmplifierSpeaker

Advertising
This manual is related to the following products: