Panasonic PV-DF2002 - Manual (Page 13)

13
Initial Setup
Unit
Optical digital audio
cable (optional)
Decorder with Dolby Digital/
dts processing (optional)
Amplifier
Center speaker
Front
Speaker Front
Speaker
Subwoofer
Surround
speaker Surround
speaker
■
Unit
➔
Decoder with Dolby Digital
➔
Amplifier
➔
Speaker
or
dts
(digital theater systems)
When DVDs recorded in Dolby Digital or dts are played, Dolby Digital bitstream or dts bitstream
is output from the unit Optical digital audio output connector. When the unit is connected to a
Dolby Digital decoder or dts decoder, you can enjoy theater-quality audio in your home.
[An optical digital audio cable (optional) is required when an optional Dolby Digital decoder or
dts decoder is used.]
Notes on connecting an Optical
digital audio cable (optional)
•
Caution for optical digital audio
output connector:
• When connecting an amplifier (with
an Optical digital input connector)
which does not contain the Dolby
Digital or dts decoder, be sure to
select “OFF” at “Dolby Digital” and
“OFF” at “dts” of the Settings for
DVD Operation “AUDIO OUTPUT”
attempt to play DVDs may cause
such a high level of noise that it may
be harmful to your ears and damage
your speakers.
• When a dts decoder is connected,
please select “Bitstream” at “dts” of
the Settings for DVD Operation
“AUDIO OUTPUT”. If “OFF” is
selected, there will be no sound.
• Video CDs and CDs can be played
as normal.
Note:
• Some dts decoders which do not
support DVD-dts interface may not
work properly with the unit.
Firmly connect the cable to
the connector
(see page 58). Otherwise, any
(See page 58).