Panasonic PV-DF2002 - Manual (Page 11)

Location of Controls (continued)
Connections
11
Initial Setup
Rear View of the unit
AC Power Plug
WARNING:
Overtightening “Nut type” RF coaxial cables
may damage jacks. Finger tighten only.
For ANT./Cable
Connect the cable from
Antenna/Cable to the VHF/UHF
terminal on the unit.
For DSS/Cable Box
Connect the OUT jack on your
cable box to the VHF/UHF
terminal on the unit with a RF
cable.
When plugged into an AC outlet,
this unit consumes 3.5 W of
VHF/UHF Antenna
Input Terminal
Audio Output
Connector (L/R)
Pg. 12
Optical digital audio
output connector
Pg. 13
VHF/UHF
UNIT
IN from
ANT./CABLE
VHF/UHF
VHF/UHF
Cable TV
Converter Box
IN from
ANT./CABLE
See below.
electric power in OFF condition.