Panasonic PV-DF2002 - Manual (Page 30)

30
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Press PROG to end
the program.
To Enter More
Programs,
press
to select
and SET to set a blank
program number, and
then repeat step 3.
Press PROG twice to exit this mode.
• If you’re using a cable box, make sure that it
is tuned to the desired channel and the power
is left on for timer recording.
• PROG TIMER Indicator lights up on the unit.
Timer Recording
You can set up to 8 programs to be recorded while
you are away.
1
2
3
Ready Checklist
All connections are made.
Your unit is plugged in.
The clock is set to correct time.
The tape is long enough.
The record tab is in place.
Press PROG* to display SET
PROGRAM screen.
1) Press to select
TIMER PROGRAMMING .
2) Press SET to
display screen .
• If a program is already in
memory, press , and
SET to select an unused
program number.
Press to select
and SET or to set
the recording DATE.
• 1~31 = One time
• DAILY = MON~FRI
• WEEKLY SUN~SAT
= Same time once a week
Repeat step 3 to set:
• start time, stop time
• Channel (or LINE for outside source)
• Speed (SP, LP, SLP)
Today’s
Date
Example
DAILY 7
2 1 31 6 8 9
SELECT / Selection Order
WEEKLY
(SAT)
WEEKLY
(MON)
WEEKLY
(SUN)
4
5
CANCEL : ADD / DLT
SELECT 1 - 8 :
ENTER : SET
END : PROG
P DT START STOP CH SPD
1 day 9 : 00 p 12 : 00a 08 SP
2 -- -- : -- -- : -- -- --
3 -- -- : -- -- : -- -- --
4 -- -- : -- -- : -- -- --
SET : SET
SELECT :
END : PROG
SET PROGRAM
T I MER PROGRAMM I NG
ON T I MER
S LEEP T I MER : 00
SELE CT START DATE
7 FR I --:-- --:-- --
TODAY
DATE START STOP CH
SELECT :
SET : SET
END : PROG
- - - - - - - - -- - - - - - - -- - - - - - -
PROG TIMER Indicator