Presonus Audio electronic 26x26 FireWire Recording System - Manual (Page 27)

4 Applications and Example Settings
27
4.2 Live Recording
Live Recording Scenario 1: This setup scenario makes computer recording primary
to the P.A. system or House Mix. This setup scenario allows the FireStudio to
preamplify the signals that will be recorded by your computer and then mixed by
the Main Mixing Console or P.A. system.
1. Connect all audio sources to the FireStudio +/- DigiMax FS to be used as a
preamp and computer recording.
2. Route all input channels of the FireStudio to all outputs of same channels in
the FireStudio Control Console.
3. Connect all FireStudio +/- DigiMax FS outputs to Line Level input channels of
the Main Mixing Console or P.A. system.
NOTE: The routing of the FireStudio is zero latency and is saved in Flash Memory.
If communication is lost between the FireStudio and the computer, the FireStudio will
retain its routing settings and continue to pass audio. The signal to the Main Mixing
Console or P.A. system will never be interrupted. See section 2.3, Stand Alone
Operation.