Prince Castle TX Series - Manual (Page 3)

2. Use the “UP” or “DOWN” buttons to adjust to the
desired setting. Press and release the “SET” button
to save the new setting and return to the operation
mode.
FAHRENHEIT AND CELSIUS SETTINGS
1. To switch the unit from Fahrenheit to Celsius,
press and hold the “DOWN ARROW” once you
release it the unit will switch to Celsius. To switch
from Celsius to Fahrenheit press and holdand
release the “UP ARROW” when you turn the unit
on.
BUN CRUSH SETTINGS
1. The toaster is designed to adjust for different cuts
of buns. The bun crush adjustment knobs are
located on both sides of the toaster. Right side
adjustment is for HEELS, and left side adjustment
is for CROWNS.
1=Thinnest Cut Crowns A=Thinnest Cut Heels
6=Thickest Cut Crowns F=Thickest Cut Heels
VIEW ACTUAL TEMPERATURE
1. When the toaster is at the proper operating tem-
perature, the display will always show “RDY”. To
view the actual temperature, press and release
either the “UP ARROW or DOWN ARROW. The
display will show the actual platen temperature for
5 seconds, then switch back to “RDY”.
VIEW SET POINT TEMPERATURE
1. To view the Set Point Temperature, press and
release the “SET” Button. The LED next to the
“ACT” goes off and the LED next to “SET” comes
on, and the set point temperature will be displayed
for 5 seconds, then the display will change back to
“RDY”.
PROGRAMMING SET POINT TEMPERATURE
1. To change the set point temperature, press and
hold the “SET” button for 6 seconds. The LED’s
next to “SET” and “PROG” will flash and the current
set point temperature will be displayed.
3
PROG
ACT
SET
RDY
PROG
ACT
SET
500
PROG
ACT
SET
RDY
PROG
ACT
SET
RDY
PROG
ACT
SET
500 PROG
ACT
SET
RDY
5 0 5
PROG
ACT
SET
PROG
ACT
SET
5 0 0 PROG
ACT
SET
RDY