Panasonic Panafax UF-5950 - Manual (Page 115)

Sub-addressing
115
Ne
tw
or
k
Fe
at
ur
e
s
Using One-Touch/ABBR. Number Dialing
The operation is the same as for normal dialing
Using Manual Number Dialing
Use
to separate the Telephone number, and the Sub-address.
NOTE
1. separates the Sub-address from the Telephone number, and is indicated by an "s"
in the display.
2. Manual Off-Hook, or On-Hook Dialing cannot be used with the Sub-addressing Transmission.
3. The Sub-address is not transmitted during Manual Redial Mode.
To Send a Document with Sub-address
1
Set document(s) face down.
ENTER STATION(S)
THEN PRESS START 00%
2
Ex:
<01>(Station name)
5551234s2762
3
The document is stored into memory, and your machine
starts to dial the number of the station, and sends the
document(s) with Sub-addressing information.
* STORE * NO.001
PAGES=001 01%
1
Set document(s) face down.
ENTER STATION(S)
THEN PRESS START 00%
2
Enter the telephone number, press then enter
the Sub-address (up to 20 digits).
(Up to 36 digits including telephone number, pauses,
spaces, FLASH and Sub-address)
Ex: Telephone number = 5551234, Sub-address =2762
Enter as:
TEL. NO.
5551234s2762
❚
3
The document is stored into memory, and your machine
starts to dial the number of the station, and sends the
document(s) with Sub-addressing information.
* STORE * NO.001
PAGES=001 01%
FLASH
FLASH
5 5 5 1 2 3 4
FLASH 2 7 6 2
FLASH