Panasonic Panafax UF-5950 - Manual (Page 46)

Sending Documents
46
Your machine quickly stores the document into the machine's memory.
Then, starts to dial the telephone number.
If the transmission fails, your machine will re-transmit the remaining unsuccessful page(s) automatically.
NOTE 1. The File Number of the document being stored is shown at the upper right corner of the display
while storing the document. It is also printed on the Communication Journal (COMM.
JOURNAL), Transaction Journal, and File List. The percentage of memory used is shown on
the lower right corner of the display after each page is stored.
* STORE *
NO.003
PAGES=002 10%
* STORE * COMPLETED
TOTAL PAGES=005 30%
2. If memory overflow occurs while storing documents, the remaining documents on the ADF will
be ejected. The machine prompts you whether to transmit the successfully stored documents,
or to cancel the transmission. Press
to cancel, or press to transmit.
MEMORY OVERFLOW
INFO. CODE=870
See the Specifications on page 143 for the image memory capacity.
If no action is taken within 10 seconds, the machine will start transmitting the stored
documents.
3. An Information Code will display if the transmission has failed, or no answer at the receiving
side after the last automatic redial.
The document stored for this transmission will be erased from the memory automatically, and
the information code is printed for the transmission on the Communication Journal (COMM.
JOURNAL).
If you need to retain the incomplete documents even after the last redial, change Fax
Parameter No. 31 (INC. FILE SAVE) to "Valid" in advance. (See page 37)
To retry the incomplete documents, refer to page 89.
INCOMPLETE
INFO. CODE=XXX
Memory Transmission
Transmit Receive
A
A
A
1
Destination A
Destination B
2 3
Store Document
in Memory
1 2