Paxar Rewind Monarch 415 - Manual (Page 15)

5. Burster Option Setup and
Operation
Proper positioning of the printer, burster, and supplies is
critical.
1. Place the Rewind/Burster assembly in the proper position
in front of the printer. A drawing showing the correct
position for all supported printers and optional location
guides for alignment is inside the back cover.
2. Print or feed approximately 36 inches of labels from the
printer.
3. Bend and separate the supply along the perforations into
individual strips for about 18 inches (Figure 12).
Figure 12
11