Panasonic DMR-E80H - Manual (Page 22)

22
RQT6984
Pla
y
ing bac
k
Other methods of play
You can mark positions by pressing [MARKER]. Also use on-screen
menus to mark, recall, and clear positions.
[HDD] [RAM] [DVD-R]
Mark up to 999 positions. The unit records the markers directly onto
the disc and they remain intact even if you remove the disc.
[DVD-A] [DVD-V] [VCD] [CD] [MP3]
Mark up to 5 positions. The markers clear when you open the disc
tray.
During play
Press [MARKER].
One marker is added.
1
During play
Press [DISPLAY].
The on-screen menus appear.
2
Press [ 3 , 4 ] to select “Play” and
press [ 1 ].
e.g., DVD-RAM
3
Press [ 3 , 4 ] to select “Marker” and
press [ 1 ] to highlight the first aster-
isk ( ¢ ).
[HDD] [RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]
4
Press [ 2 , 1 ] to select an asterisk ( ¢ )
and press [ENTER].
One marker is added.
To recall a marker
Press [
2 , 1 ] to select a marker number and press [ENTER].
≥ Play starts from the marked position.
To clear markers
Press [
2 , 1 ] to select a marker number and press [CANCEL].
≥ An asterisk replaces the number and the position is cleared.
To clear the on-screen menus
Press [RETURN].
Marking places to play again—MARKER
Marking positions directly
Using on-screen menus to mark positions
DVD TV
INPUT SELECT VCR Plus+ OPEN/CLOSE TV/VIDEO
CH
VOLUME
SKIP
DIRECT NAVIGATOR PLAY LIST
TOP MENU
ENTER
MENU
FUNCTIONS RETURN
STOP PAUSE PLAY/x1.3
SLOW/SEARCH
CANCEL
1 2 3
DVD TV
4 5 6
7 8 9
0 100
FRAME CM SKIP TIME SLIP
ERASE REC PROG/CHECK ADD/DLT
DUBBING REC MODE STATUS MARKER
AUDIO SETUP DISPLAY POSITION
MEMORY
POWER
3 , 4 , 2 , 1
ENTER
RETURN
HDD DVD
DISPLAY
MARKER
CANCEL
Disc
Video
Audio
OFF
1 s 10
††††††††††
Marker
Play
Repeat play
1 s 10
† ††††††††† † ††††
When marking positions 11 and above
[HDD] [RAM] [DVD-R]
1 Press [ 2 , 1 ] to highlight “1–10”.
2 Press [ 3 , 4 ] to select “11–20”.
You can select the next group of 10 when the current group is
full.
3 Press [ 1 ].
The first asterisk is highlighted.
4 Press [ENTER] to mark a position.
[Note]
≥ You cannot use this feature if:
– the disc’s elapsed play time is not shown in the display.
– you are using a play list.
[HDD] [RAM]
– protection (cartridge ➜ page 10, disc ➜ page 36) is set (you
can still recall the markers to play a position). [RAM]
≥ Subtitles around markers may fail to appear.
≥ Markers are cleared when you finalize DVD-R ( ➜ page 36).
≥ Markers on HDD, DVD-RAM and DVD-R are ordered by time,
so marker numbers can change when you add and delete
them.
1 2 1 s 10