Panasonic DMR-E80H - Manual (Page 24)

24
RQT6984
Timer recor
d
ing
Timer recording
[HDD] [RAM] [DVD-R]
This is a simple way of specifying a time to stop recording when you
are in a hurry or before you go to bed.
During recording
Press [ ¥ , REC] to select the recording time.
Each time you press the button:
0:30 "# 1:00 "# 1:30 "# 2:00 "# 3:00
^"" Counter (cancel) !" 4:00 ,""}
For your reference
≥ Press [STATUS] to show the time remaining until recording finishes.
≥ This does not work during timer recordings or while using Flexible
Recording (
➜ page 16).
≥ Recording stops and the set time is cleared if you press [ ∫ ].
≥ The set time is cleared if you change the recording mode or chan-
nel while recording is paused.
Preparation
≥ Ensure the clock (and guide channels for VCR Plus r recording,
➜ page 8) are set correctly.
≥ Release protection (cartridge ➜ page 10, disc ➜ page 36) before
proceeding. [RAM]
Entering VCR Plus i codes is an easy way of programming the unit
for recording. You can find these codes in newspapers and maga-
zines. You can enter up to 32 programs up to a month in advance.
1
Press
[VCR Plus
r ].
2
Press the numbered buttons to enter
the VCR Plus
r code.
Press [ 2 ] to move
back to correct a
digit.
3
Press [ENTER].
Confirm the program and make corrections if necessary using
[
3 , 4 , 2 , 1 ].
≥ “Invalid Entry” is displayed when you enter the wrong code.
Reenter the code.
≥ To select the recording drive
1 Press [ 2 , 1 ] to select “DRIVE”.
2 Press [ 3 , 4 ] to select “HDD” or “DVD”.
≥ To change the recording mode
Press [REC MODE].
≥ To enter the title of the program
Press [
2 , 1 ] to select “Enter Title” and press [ENTER]
( ➜ page 38).
Repeat steps 1–3 to program other recordings.
4
Press [RETURN].
The timer recording list disappears and the unit enters Timer
Recording standby mode (“
F
” appears on the unit display).
≥ The unit is not off. To save power, turn the unit off by press-
ing [
Í , DVD POWER].
Specify a time to stop recording
DVD TV
INPUT SELECT VCR Plus+ OPEN/CLOSE TV/VIDEO
CH
VOLUME
SKIP
DIRECT NAVIGATOR PLAY LIST
TOP MENU
ENTER
MENU
FUNCTIONS RETURN
STOP PAUSE PLAY/x1.3
SLOW/SEARCH
CANCEL
1 2 3
DVD TV
4 5 6
7 8 9
0 100
FRAME CM SKIP TIME SLIP
ERASE REC PROG/CHECK ADD/DLT
DUBBING REC MODE STATUS MARKER
AUDIO SETUP DISPLAY POSITION
MEMORY
POWER
3 , 4 , 2 , 1
ENTER
∫
Í , DVD POWER
VCR Plus+
PROG/CHECK
STATUS
RETURN
¥ , REC
REC MODE
HDD DVD
Numbered
buttons
e.g.,
Using VCR Plus r codes to make timer
recordings
No.
VCR Plus i
3/26 TUE12:53 PM
Enter PLUS CODE Number by using 0–9 key.
1:42 SP Remain HDD DVD 17:36 SP
3/26 TUE12:53 PM
VCR Plus i
1 2 1 2 1 2 1 2
1:42 SP Remain HDD DVD 17:36 SP
TIMER
RECORDING
MODE DRIVE CHECK OFF ON No CHANNEL DATE
3/26 TUE 12:55 PM
01 SP Enable 2:00 PM 1:00 PM 64 ABC 3/ 26 TUE
1:42 SP Remain HDD DVD 17:36 SP
New Timer Program
5:10 PM 4:20 PM 4 / 1 MON
MODE DRIVE OFF ON CHANNEL DATE
SP HDD 39
TIMER
RECORDING
3/26 TUE12:53 PM
3
4
Enter Title
1:42 SP Remain HDD DVD 17:36 SP
The current
recording mode
(shown on the
unit’s display) is
automatically
selected.
When you press [ENTER]
Displayed if the
recording can fit
in the remaining
space on the
HDD or disc.