Connecting up 02, Connecting the multichannel analog outputs, Connecting the digital output – Pioneer VRB1332-A User Manual

Page 13

Advertising
background image

Connecting up

02

13

En

Connecting the multichannel analog
outputs

If your AV receiver has 5.1 channel analog
inputs, we recommend connecting this player
to it using the multichannel analog outputs.
Doing this will ensure that you can enjoy all
kinds of disc, including Dolby Digital and DTS
DVD-Video discs, as well as high sampling rate
and multichannel DVD-Audio and SACD discs.

Connect the MULTICHANNEL AUDIO

outputs on this player to the multi-channel
audio inputs on your AV receiver.

It’s convenient to use three stereo audio
cables; one for the

FRONT

, one for the

SURROUND

and one for the

CENTER

and

SUBWOOFER

channels.

You can use the SCART AV connector, or the S-
video or component video jacks to connect to
the AV receiver if you prefer.

Tip

• After connecting up and switching on, you

should change the

Audio Output Mode

setting in the Initial Setup menu from the
default

2 Channel

to

5.1 Channel

. See

also

Audio Output Mode

on page 40.

Connecting the digital output

This player has both optical and coaxial-type
digital audio outputs for connection to an AV
receiver. Connect whichever is convenient.

Depending on the capabilities of your AV
receiver, you might have to set up this player to
output only digital audio in a compatible
format. See

Digital Audio Out settings

on

page 34 and refer to the operating instructions
that came with your AV receiver.

Connect one of the DIGITAL AUDIO OUT

jacks on this player to a digital input on
your AV receiver.

For an optical connection, use an optical cable
(not supplied) to connect the

OPTICAL

DIGITAL AUDIO OUT

jack to an optical input

on your AV receiver.

For a coaxial connection, use a coaxial cable
(similar to the supplied video cable) to connect
the

COAXIAL DIGITAL AUDIO OUT

jack to a

coaxial input on your AV receiver.

S

VIDEO OUT

AUDIO OUT (5.1 ch ) CENTER

COMPONENT VIDEO OUT

AUDIO OUT ( 2 ch )

FRONT

SURROUND

SUB

WOOFER

COAXIAL

OPTICAL

DIGITAL AUDIO OUT

VIDEO

OUT

P

R

P

B

Y

L

L

R

R

AV receiver

MULTI-

CH. INPUTS

S

VIDEO OUT

AUDIO OUT (5.1 ch ) CENTER

COMPONENT VIDEO OUT

AUDIO OUT ( 2 ch )

FRONT

SURROUND

SUB

WOOFER

COAXIAL

OPTICAL

DIGITAL AUDIO OUT

VIDEO

OUT

P

R

P

B

Y

L

L

R

R

AV receiver

DIGITAL IN

(OPTICAL)

DIGITAL IN
(COAXIAL)

DV575A WY_Mid.book 13 ページ 2004年1月28日 水曜日 午後6時53分

Advertising
This manual is related to the following products: