Pioneer VRB1332-A - Manual (Page 19)

Getting started 04
19
En
1 If the player isn’t already on, press
STANDBY/ON to switch it on.
If you’re playing a DVD or Video CD/Super VCD,
also turn on your TV and make sure that it is set
to the correct video input.
2 Press OPEN/CLOSE to open the disc
tray.
3 Load a disc.
Load a disc with the label side facing up, using
the disc tray guide to align the disc (if you’re
loading a double-sided DVD disc, load it with
the side you want to play face down).
4 Press (play) to start playback.
If you’re playing a DVD or Video CD/Super VCD,
an on-screen menu may appear. See
DVD disc
menus on page 20 and Video CD/Super VCD
PBC menus on page 21 for more on how to
navigate these.
• If you’re playing an MP3/WMA disc, it may
take a few seconds before playback starts.
Note
• You may find with some DVD discs that
some playback controls don’t work in
certain parts of the disc. This is not a
malfunction.
Basic playback controls
The table below shows the basic controls on
the remote for playing discs. The following
chapter covers other playback features in more
detail.
0
1 2 3
4 5 6
7 8 9
STANDBY/ON OPEN/CLOSE
ENTER
ENTER
/ /
Button What it does
Starts playback.
If the display shows
RESUME or
LAST MEM playback starts from
the resume or last memory point
(see also
Resume and Last Memory
on page 20.)
Pauses a disc that’s playing, or
restarts a paused disc.
Stops playback.
See also
Resume and Last Memory
on page 20.
(remote
only)
Press to start fast reverse scanning.
Press
(play) to resume normal
playback.
(remote
only)
Press to start fast forward scanning.
Press
(play) to resume normal
playback.
DV575A WY_Mid.book 19 ページ ２００４年１月２８日 水曜日 午後６時５３分