Read this first! (for ag-hmx100p) (continued), 4fcc notice (u.s.a.) – Panasonic AG-HMX100E User Manual

Page 4

Advertising
background image

4

FCC NOTICE (U.S.A.)

Declaration of Conformity

Model Number:

AG-HMX100P

Trade Name:

Panasonic

Responsible Party:

Panasonic Corporation of North America

One Panasonic Way, Secaucus, NJ07094

Support contact:

1-800-524-1448

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
To assure continued compliance, follow the attached installation instructions and do not make any unauthorized
modifications.

Note:

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

The user may find the booklet “Something About Interference” available from FCC local regional offices helpful.

Warning:

To assure continued FCC emission limit compliance, follow the attached installation instructions and the user must use
only shielded interface cables when connecting to host computer or peripheral devices. Also, any unauthorized changes
or modifications to this equipment could void the user’s authority to operate this device.

Read this first! (For AG-HMX100P) (continued)

Advertising
This manual is related to the following products: