Panasonic NV-MV40GL - Manual (Page 9)

9
Settings Using the On Screen
Display
Preparations
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Turn on the VCR.
• Set [VCR/TV] switch
(22) to [VCR].
To Set the Colour TV System
1 Press [MENU] (7) to display the
Main menu on the TV screen.
2 Press [Cursor] (37) ( 34) to
select [SYSTEM] then press
[OK]
(23).
3 Press [Cursor] (37) ( 34) to
select [AUTO].
• The VCR automatically distinguishes between PAL or
NTSC signals. If the picture lacks of colour during AV
external recording or playback, set to [PAL] or [NTSC].
• When you want to record or play back in black and white,
set to [B/W].
4 Press [MENU] (7) twice to exit the On Screen Display.
To Make Various Indicators Appear On
Screen Display
At a press of [OSD] (35), the
following indications appear on the
TV screen.
• Set [OSD] to [AUTO].
(See page 10.)
• The display is released
automatically after 5 seconds.
1 Programme position
2 Tape running display
3 Present time/Tape counter/Remaining tape time/Index
Search/OTR indication/JET Rewind
4 Tape speed indicator (SP/LP/EP)
5 Cassette-in indicator
6 Colour system indicator
Any selected colour TV system except [AUTO] appears on
screen display. (See the To Set the Colour TV System.)
7 Picture mode indicator
At each press of [PICTURE MODE] (29), the selected
picture mode is set and following picture mode indicators
appear.
Example:
STANDARD: For TV programme recorded
DYNAMIC:
For Scenery, Sports
SOFT: For Rental soft tape
CARTOON: For Cartoon
Note:
• The On Screen Display may be disturbed or disappeared
during special playback.
Stop, Eject
Rewind, Review,
Index Search
:,
Jet Search 6,
Jet Rewind
6
Fast Forward, Cue,
Index Search
9,
Jet Search 5
5
Playback 1
Recording ¥
Recording pause ;¥
Repeat playback R 1
SYSTEM
END :MENU
SELECT:
AUTO
PAL
NTSC
B/W
CH 1
STANDARD
0:00.22
SP
PAL
2 3 4
5
7
1
6
Information Display
Present time 17:24
Tape counter -2:35.47
Remaining tape time REMAIN 2:34
Index Search S 01
OTR indication OTR 60
JET Rewind J . REW