Pantech PN-218 - Manual (Page 8)

C
H
1
13
C
H
1
12
BATTERY USAGE BATTERY USAGE
BATTERY STANDBY TIMES (FOR NEW BATTERY)
The standby time is subject to the condition of your battery and how
much charge it has. Extreme hot or cold temperature will also reduce
your battery charge. Below is a chart distinguished between the DCS
(1800 MHz) and PCS (1900 MHz) mode for a new battery.
BATTERY USAGE TIMES
The usage time or talk time is subject to your distance from the cell
base station that communicates with your phone. The farther you are,
the more power your phone will consume. It is also subject to the types
of frequency band its operating in. Below is a chart distinguished
between the DCS (1800 MHz) and PCS (1900 MHz) mode.
• These times are for a new battery. Usage and Standby time
may decrease over time.
• Talk time for the standard battery: about 207 minutes.
Standby time for the standard battery: about 190 hours.
• When you charge the battery with the phone power off, you
will see a charging status screen. You cannot operate the
phone until it is powered on.
• The battery is not charged at the time of purchase.
• Fully charge the battery before use.
• It is more efficient to charge the battery with the handset
powered off.
• The battery must be connected to the phone in order to charge it.
• Battery operating time gradually decreases over time.
• If the battery fails to perform normally, you may need to replace
the battery.
1 Plug the AC Charger into a standard outlet.
2 Plug the other end of the AC Charger into the
bottom of your phone. The battery must be
installed onto the phone.
BATTERY CHARGING
POWER CONNECTION
PCS
Up to 160 Minutes
Up to 270 Minutes
DCS
Up to 207 Minutes
Up to 282 Minutes
STD 1000 mAh
Battery Capacity
EXT 1350 mAh
PCS
Up to 172 Hours
Up to 293 Hours
DCS
Up to 190 Hours
Up to 326 Hours
STD 1000 mAh
Battery Capacity
EXT 1350 mAh