Panasonic PT-L780E - Manual (Page 13)

E NGLISH -25
Preparation
24-E NGLISH
USB DVI-D IN
REMOTE
SERIAL RGB1 IN RGB2 IN/RGB OUT AUDIO OUT
RGB AUDIO IN VIDEO IN AUDIO IN
S-VIDEO IN
R
L
R/R-Y/P R VD SYNC/HD B/B-Y/P B RGB3 IN G/Y
1 6 2 3 4 5 ON DIP
D-sub 9-pin
(male)
Computer for
control use
Computer
NOTE:
B It is better to shut down the computer before turning off the MAIN POWER
switch of the projector.
B Refer to the list of compatible signals on page 61 for the types of RGB
signals which can be input to the projector by connecting a computer.
B Do not input the signal to the RGB2 IN/RGB OUT connector when the
RGB2 SELECT item in the OPTION menu is set to OUTPUT. (Refer to
page 44.)
Example of connecting to computer
Monitor
Audio system
Refer to the accessory CD-ROM for details on connecting the
projector to a personal computer by means of a wireless or wired
network using an optional wireless card or projector LAN card.
(PT-L780NTE only)
Example of connecting to video equipments
USB DVI-D IN
REMOTE
SERIAL RGB1 IN RGB2 IN/RGB OUT AUDIO OUT
RGB AUDIO IN VIDEO IN AUDIO IN
S-VIDEO IN
R
L
R/R-Y/P R VD SYNC/HD B/B-Y/P B RGB3 IN G/Y
D-sub 15 (male) - BNC5 (female)
adapter cable (sold separately)
Red (connect to P R signal connector)
Blue (connect to P B signal connector)
Green (connect to Y signal connector)
Digital broadcast
tuner or DVD player
D-sub 9-pin
(male)
DVD player Audio system
Video deck
NOTE:
B Only one audio system circuit is available for the AUDIO IN L-R jacks for
S-VIDEO/VIDEO signals, so if you wish to change the audio input source,
you will need to remove and insert the appropriate plugs.
B Only one audio system circuit is available for the RGB AUDIO IN jacks, so
if you wish to change the audio input source, you will need to remove and
insert the appropriate plugs.
B If an audio system is connected to the AUDIO OUT jack, the sound
volume balance can be controlled by the remote control unit which is
supplied with the projector.
B If the video signal source is connected using a cable with a BNC
connector plug, use a BNC/RCA adapter (sold separately) to convert the
cable end to an RCA plug-type jack.
B Refer to page 61 for a list of compatible YP B P R signals which can be input
to the projector.
B If the signal cables are disconnected or if the power supply for the
computer or video deck is turned off while the digital zoom function is
being used, this function will be cancelled.
Computer for
control use
DVD player
Red (connect to P R signal connector)
Blue (connect to P B signal connector)
Green (connect to Y signal connector)
Computer
Computer with
DVI-D OUT connector
DVI cable (Option)
(ET-SCDV03)