Panasonic AJ-CA910P - Manual (Page 5)

5
Parts and Their Functions
1 2
3
7
STBY
SAVE
POWER
AUDIO IN
MIC POWER
CH 3
MIC
LINE
OFF
ON
CH 4
5
6
4
1 Audio CH 3/CH 4 level meter
2 AUDIO LEVEL CH 3/CH 4 (audio
channel 3/4 recording level) controls
When the AUDIO SELECT CH 3/CH 4
switch
4 is set to MAN, the recording
levels of the audio channel 3 and 4
signals can be adjusted using these
controls.
3 MONITOR SELECT (audio channel
selector) switch
This is used to select the audio channel
whose signals are to be output from the
AUDIO OUT connector or PHONES
jack.
CH 3
: The audio CH 3 signals are
output.
CH 4 : The audio CH 4 signals are
output.
ST/MIX : The audio CH 3 and CH 4
signals are mixed and output to
the AUDIO OUT connector.
Stereo audio signals are output
to the PHONES jack.
4 AUDIO SELECT CH 3/CH 4 (audio
channel 3/4 automatic/manual level
adjustment selector) switch
This is used to select the method for
adjusting the audio channel 3 and/or 4
recording level.
AUTO : The recording level is adjusted
automatically.
MAN : The recording level is adjusted
manually.
5 AUDIO IN CH 3/CH 4 (audio input
selector) switches
These are used to select the input
signals which are to be recorded on
audio channels 3 and 4.
MIC : The audio signals from the mic
input are recorded.
LINE : The audio signals which are input
from the audio component are
recorded.
6 MIC POWER CH 3/CH 4 (mic power
selector) switches
These are used to turn on or off the
power to the microphones which are
connected to the AUDIO IN CH 3 and
CH 4 connectors.
ON : Power (+48 V) for phantom
microphones is supplied.
OFF : No power is supplied.
7 POWER switch
This controls the camera adapter’s
power.
STBY : The unit’s power is turned on or
off in tandem with the setting of
the power switch on the camera.
SAVE : The camera adapter’s power is
turned off regardless of the
setting of the power switch on
the camera.