Panasonic AJ-CA910P - Manual (Page 6)

6
Parts and Their Functions
8
9
;
<
:
; AUDIO OUT connector
This is connected to the audio
component.
The audio output channel is selected
using the MONITOR SELECT switch
3 .
XLR, 3-pin, male
+4 dBu (can be changed using
internal control)
< DC IN (external power input) socket
(XLR, 4P)
Connect the AJ-B75 (optional
accessory) AC adapter to this socket
when AC power is to be used to operate
the camera adapter.
XLR, 4-pin, male
DC 12 V (DC 11 V–17 V)
8 PHONES (headphones) jack
Stereo mini jack
9 PHONES LEVEL (headphones output
level adjustment) control
This is used to adjust the level of the
audio output from the PHONES jack.
: AUDIO IN CH 3/CH 4 (audio input
channel 3/4) connectors (XLR, 3-pin)
The audio component or microphones
are connected to these connectors.
XLR, 3-pin, female
LINE/MIC switching type
LINE : +4 dBu (can be changed to
0 dBu using internal switch)
MIC : –60 dBu (can be changed to
–40 dBu using internal
switch)
Phantom power supplies supported.
Operating Cautions
O
Set the EMPHASIS item of the audio menu of the camera unit to OFF before use.
O
Please consult your local dealer or service center when changing the settings of the
switches or VR inside the unit.