PYLE Audio PLPK5TVD - Manual (Page 19)

19
REMOTE CONTROL HANDSET
2
11
8 9
10
16
5
6
7
14
13
15 12
17
4
3
1
CONTROL & FUNCTION KEYS
1. POWER = Press POWER to turn the unit ON or OFF
2. TV/AV = Switch between TV/AV1/AV2
3. 0 - 9 = Numeric buttons, press to select the corresponding channel
4. -/-- = Digital selecting button, cooperatively used with numeric buttons
5. MUTE = Press to mute the sound. When release the button, the screen will
display VOLUME XX for about 4 seconds, and this is the AUDIO level
setting value of the TV unit. The users may not mind it, and that adjust
the volume level by VOL + and VOL – buttons.
6. SCAN = Scan 1.5 seconds of each channel
7. MENU = Display the main menu to adjust picture and set program and control system
8. / = In case of MENU mode, the buttons are used to select the sub-menus
9. / = In case of MENU mode, the buttons are used to adjust the selected item
10. VOL + = Increase the volume level
11. VOL – = Decrease the volume level
12. PICT = Select picture mode. There are five modes: STANDARD, SHARP,
BRIGHT, MEMORY and MILD. The MEMORY mode is user-defined
mode and the others are preset mode.
13. RETURN = Switch between last viewed channel and this time viewed channel
14. CH +
= Choose channel upward
15. CH – = Choose channel downward
16. DSP = Press to display the channel number and SYSTEM status. In AV mode,
there is no SOUND SYSTEM display
17. SORT = Program sorting button, cooperatively used with digital selecting button
and numeric buttons