Pioneer DOUBLE-DIN DVD NAVIGATION SYSTEM AVIC-D2 - Manual (Page 58)

56
Chapter
4
E
d
it
in
g the Na
vigation Utilit
ie
s
NAV
I
Displaying favorite browsable
Information
XM special contents can be assigned as a short-
cut or “My Favorites” so that it can be accessed
without having to search every time an update is
needed. The following are the instructions on
how to do so:
1
Store the desired item (topic).
➲ Displaying browsable information ➞
Page 55
2
Touch “Info/Traffic” in the Main menu,
and then touch “My Favorites”.
A list of registered items (topics) appears on
the screen. Touch the item to display informa-
tion about this item.
Deleting favorite browsable information
1
Touch “Info/Traffic” in the Main menu,
and then touch “My Favorites”.
2
Touch “Delete”.
3
Touch the name of the items you wish to
delete.
A red check appears next to the items you
touched.
❒ To delete all favorite contents, touch “All”.
Red checks will appear next to all the
items.
4
Touch “Delete”.
5
A message will appear asking you to con-
firm the deletion. Touch “OK”.
Checking the Reception Status
of the XM Tuner
The current XM tuner’s (GEX-P10XMT) reception
status and signal strength appear on screen. (The
information that is transmitted via XM DATA
cable is displayed in this screen.)
1
Touch “Info/Traffic” in the Main menu,
and then touch “XM Status”.
(1) Status
Depending on the XM tuner’s (GEX-P10XMT)
reception status, any one of the following may
appear.
OK
No problem.
Updating
Updating encryption code.
Check antenna
Improper antenna connection.
Not Connected
(2) Signal Strength
Depending on the signal strength, any one of the
following may appear.
Very Strong
Strong
Marginal
Weak
No signal
(3) Radio ID
The radio ID appears.
❒ If you have subscribed to either XM audio only
or XM NavTraffic stand alone, you will see
“Updating” in the “Status”. This is because
the GEX-P10XMT is constantly checking to see
if you have decided to add the other service
while your navigation system is turned on. If
you subscribe to both services, appropriate
status will be shown in the “Status”.
(1)
(2)
(3)