Planet Technology BT-420U - Manual (Page 30)

No matter how the connection was created, in My Bluetooth Places, right-click the
service name and select Disconnect.
Configure
The Bluetooth Configuration Panel > Client Applications > Audio Gateway > General
tab provides options to configure:
‧ The application name - to change it, highlight the existing name and enter the
new name.
‧ Enable or disable secure connection. To enable secure connection, select the
check box.
6.5.5 Bluetooth Serial Port
Overview
The Bluetooth Serial Port application allows this computer to establish a wireless
serial connection with a remote Bluetooth device.
The applications on both this computer and the remote device must be configured to
send and receive data to and from the respective communications port (COM port)
assigned to the Bluetooth serial port. The wireless serial connection may then be used
by the applications as though a physical serial cable connected the devices.
Create a Bluetooth Serial Port connection
Establish a connection using one of these techniques
‧ Windows system tray, Bluetooth icon
‧ From My Bluetooth Places
‧ Using the Bluetooth Setup Wizard
Close a Bluetooth Serial Port connection
‧ If the connection was established from the Bluetooth icon in the Windows sys-
tem tray; click the Bluetooth icon, select Quick Connect, Bluetooth Serial Port and
then select the device that is providing the service (active connections have a
checkmark in front of them).
or
‧ No matter how the connection was created, In My Bluetooth Places, right-click
the service name and select Disconnect.
Configure
The Bluetooth Configuration Panel > Client Applications > Bluetooth Serial Port >
General tab provides options to configure:
‧ The application name—to change it, highlight the existing name and enter the
new name.
‧ Enable or disable secure connection. To enable secure connection, place a
checkmark in the box.
‧ The communications port (COM port) to be used.
NOTE: Unless you have a specific reason to do so, DO NOT CHANGE the default
COM Port setting.
6.5.6 Dial-up Networking
Overview
The Bluetooth Dial-up Networking application allows this computer to use a modem
that is physically connected to a remote device to access the Internet, log on to a
remote network.
25