Planet Technology BT-420U - Manual (Page 41)

Bluetooth USB Adapter User Guide
For example, if the remote device is a Bluetooth telephone, this computer’s micro-
phone and speakers can be used as speakerphone input and output for that device.
Hardware Requirements
‧ This computer must have a sound card, microphone, and speakers installed.
‧ The Bluetooth hardware on this computer and on the remote device must sup-
port audio.
Configure the Headset Service
‧ From the Windows system tray, right-click the Bluetooth icon, select Advanced
Configuration > Local Services, and then double-click the Headset service.
‧ Set the common configuration properties of the service, and then click OK.
Usage Example with a Bluetooth Telephone
From the Bluetooth phone, search for devices that offer the Headset Service, select
the Headset Service on this computer, and then select Connect.
NOTE: Individual Bluetooth phone manufacturers may use different terminology to
describe the Headset Service, but the word “audio” and/or “headset” should be in the
description— refer to the documentation included with the Bluetooth phone for assis-
tance.
If the Headset Service has Secure Connection enabled, a PIN code and Authorization
will be required to complete the connection.
When the phone successfully connects to the Headset Service:
‧ In the Windows system tray, the Bluetooth icon will be a blue field with a green
insert (if another Bluetooth connection existed before this connection was estab-
lished, the icon would have already been this color).
‧ A notification balloon will appear briefly above the Bluetooth icon with a mes-
sage similar to:
Bluetooth Connection Successful
Bluetooth device My Bluetooth Cell Phone is connected to the ‘Headset’ service on
this computer.
The Headset Service now monitors the phone and displays a notification balloon over
the Bluetooth icon in the Windows system tray when an incoming call is detected.
Click the balloon to acknowledge the notification, and then, in the Incoming Call dialog
box, click the Accept button to accept the call.
The audio signal from the phone is re-routed to the audio output device (speakers or
earphones) on the computer, and the microphone on the computer provides the audio
input for the phone.
To reject the incoming call, when the Incoming Call dialog box is displayed, click the
Reject button.
6.6.8 Network Access
The Bluetooth Network Access service enables a remote Bluetooth device to access a
Local Area Network that is physically attached to this computer or allows a remote
device to become part of an ad hoc network provided by this computer.
After this computer has been configured to provide the Network Access service to
other Bluetooth devices, it will not be able to use the Bluetooth Network Access ser-
vice provided by another Bluetooth device without being re-configured. In other words,
this computer cannot be both a Bluetooth Network Access server and a Bluetooth
Network Access client at the same time.
6.6.8.1 Setup for Windows 98SE & Windows Me
36